QFINDER PRO CANNOT FIND NAS MACBOOK HOW TO

DHCP Client, you will get private IP address from main DHCP server.

The configuration at the network level is as follows:.

You will also be able to get this MAC from the router that provides you with the IP address, and even from the management interface itself, where the host name is made up of “NAS” followed by the last 6 characters of the MAC address.

We can find out this MAC address through Qfinder Pro for Windows and MacOS systems, or you can also see it directly in the documentation of the NAS server where it will show MAC1 somewhere. If the MAC address of LAN1 is 24:5E:BE:01:02:03 then the password is 245EBE010203. This password must be in upper case and without any symbols. The password is MAC address of interface LAN1 of the NAS server.The NAS will start to beep confirming the reset we have made, from this moment you will be able to access the NAS server again with the default parameters, which are the following: Press and hold the server reset button for 3 seconds.Power on the NAS server and wait until it is fully operational.In the event that you have forgotten the administrator password or have incorrectly configured the NAS at the network level, this is the reset that you must perform. This reset factory resets access to the QNAP NAS server with all default settings.

QFINDER PRO CANNOT FIND NAS MACBOOK HOW TO

Next, we are going to explain all the types of reset that we have available, how to do it and what exactly this reset does. Two types of reset what it does is restore the NAS settings to default values, but they do not delete any type of data, however, if you choose the options of “format all volumes” or “reboot the NAS”, then you will also have loss complete list of all the data that is on the hard drives or SSDs. Factory reset procedure failed and you lose data. If you are going to perform a reset, be it basic, advanced or any other type that we have available in the QTS operating system, our recommendation is that you make a backup of all the data on the NAS server, just in case something happens.

Qfinder pro cannot find nas macbook